- About Us
- Contacts
PROPICLO - SIMPLY GREAT!
Characteristics of the PROPICLO fence post system:
- Easy, fast installation.
- Can be used on any track and on any type of terrain.
- Can be driven even into frozen ground.
- No pre-drilling necessary.
- Not necessary to be set in concrete.
- After post installation, the netting can be easily and quickly installed and strained.
- Backed by a 30 year warranty against rust from the manufacturer.
Installing the PROPICLO fence post system:
- Mark the fence location.
- Drive post base into the ground with a jackhammer.
- Attach the posts. In case of brace posts or corner posts, install and fasten the diagonal braces.
- Install netting by hooking it into the ears found on the post.
- Strain netting, and refold the ears, to secure netting in place.
The PROPICLO post system can be assembled from special types of post elements, to meet individual needs.
Line post
Post (1 pc.):Above the ground, the post is a C-shape profile rolled from 2 mm thick high tensile strength steel sheet with strong protective anti corrosive coating, with extruded, refoldable ears to hold the wire netting. The posts are made in 1,50 and 2,10 meter lengths, with ears at a 10 cm distance from each other. However, posts with different lengths and ear-distances can be manufactured, upon request. Post base (1 pc.):Anchoring in the ground occurs with 1,20 meter long (1,00 meter on rocky terrain) post bases with simple anchor plate wings. The posts are attached as sleeves to the over ground part of the base. A couple (2 pcs) of knobs on the over ground part of the base secure the post in place after installation. |
Brace post
Post (1 pc.):Above the ground, the post is a C-shape profile rolled from 2 mm thick high tensile strength steel sheet with strong protective anti corrosive coating, with extruded, refoldable ears to hold the wire netting. The posts are made in 1,50 and 2,10 meter lengths, with ears at a 10 cm distance from each other. However, posts with different lengths and ear-distances can be manufactured, upon request. Post base (1 pc.):Anchoring in the ground occurs with 1,20 meter long (1,00 meter on rocky terrain) post bases with simple anchor plate wings. The posts are attached as sleeves to the over ground part of the base. A couple (2 pcs) of knobs on the over ground part of the base secure the post in place after installation. Diagonal brace (1 pc.):The diagonal brace is attached to the post with a bolt or clam, and its ground end is secured with a 1,00 meter steel spike driven into the ground through a whole on the flattened lower end of the brace. |
Tensional post
Post (1 pc.):Above the ground, the post is a C-shape profile rolled from 2 mm thick high tensile strength steel sheet with strong protective anti corrosive coating, with extruded, refoldable ears to hold the wire netting. The posts are made in 1,50 and 2,10 meter lengths, with ears at a 10 cm distance from each other. However, posts with different lengths and ear-distances can be manufactured, upon request. Post base (1 pc.):Anchoring in the ground occurs with 1,20 meter long (1,00 meter on rocky terrain) post bases with double, cross anchor plate wings. The posts are attached as sleeves to the over ground part of the base. A couple (2 pcs) of knobs on the over ground part of the base secure the post in place after installation. Diagonal braces (2 pcs.):The diagonal braces are attached to the post with a bolt or clam, and their ground end is secured with a 1,00 meter steel spike driven into the ground through a whole on the flattened lower ends of the braces. |
Corner post
Post (1 pc.):Above the ground, the post is a C-shape profile rolled from 2 mm thick high tensile strength steel sheet with strong protective anti corrosive coating, with extruded, refoldable ears to hold the wire netting. The posts are made in 1,50 and 2,10 meter lengths, with ears at a 10 cm distance from each other. However, posts with different lengths and ear-distances can be manufactured, upon request. Post base (1 pc.):Anchoring in the ground occurs with 1,20 meter long (1,00 meter on rocky terrain) post bases with double, cross anchor plate wings. The posts are attached as sleeves to the over ground part of the base. A couple (2 pcs) of knobs on the over ground part of the base secure the post in place after installation. Diagonal braces (3 pcs.):The diagonal braces are attached to the post with a bolt or clam, and their ground end is secured with a 1,00 meter steel spike driven into the ground through a whole on the flattened lower ends of the braces. |
« Top of page! »